SolarEdge alerts and error codes explained in plain English, with what is safe to check yourself.
SolarEdge Systems in Florida: Alerts, Repairs and Who Services Them
SolarEdge reports problems as numbered error codes and as alerts scored by impact level. Here is what they mean and what to do.
How SolarEdge systems work
A SolarEdge system pairs one central inverter, usually on a wall near the meter, with a power optimizer under each panel. The inverter display and the mySolarEdge app report problems as numbered errors and as alerts scored from impact 1 to 9.
SolarEdge codes explained
- Isolation fault (PV array not isolated from ground)
- Recurring DC isolation alert in the monitoring app
- Device locked by a safety feature or by a person
- Grid voltage too high or too low
- Grid frequency out of range
- Grid is down
- DC arc fault detected
- Arc fault detector self test failed
- One or more optimizers not reporting
- Inverter or site not communicating with SolarEdge
- Inverter over temperature
- How to read SolarEdge alert impact numbers
SolarEdge warranty after the installer closed
SolarEdge backs the inverter and the optimizers under its own product warranty, separate from the installer. When the installer is gone, a licensed contractor can diagnose which part failed, open the claim with SolarEdge, and replace the inverter or an optimizer on the roof.
Next step
Open the SolarEdge app and note the alert name before you call. Five steps for this week, or book a service call.