common causes, explained below, plus the checks that are safe to do yourself.
SolarEdge Inverter or site not communicating with SolarEdge: What It Means and What to Do
The inverter has stopped sending data to SolarEdge's servers.
What it means
The inverter has stopped sending data to SolarEdge's servers. This alert fires after about three hours without contact. Power production usually keeps going, but you lose visibility and the system cannot be watched.
Code: Alert: No communication with the Inverter / site (inverter shows Inactive in monitoring)
Common causes
- Home Wi Fi password changed or a new router installed
- Router or modem is off or lost internet
- A loose network cable or Wi Fi antenna issue at the inverter
- Inverter AC breaker tripped, so the inverter is fully off
Safe checks you can do
- Confirm your home internet works on a phone or laptop and restart the router
- Check that the solar AC breaker in your electrical panel has not tripped
- Do not open the inverter, and leave network cables to a licensed solar technician if they are inside the unit
- When to call a technician
If your internet is fine and the alert stays for a day or more, or if you recently changed routers or passwords and cannot reconnect, call a licensed solar technician or SolarEdge support. Call 866-412-4218 or book online.
Installer out of business?
You can still get this fixed. SolarEdge backs its own equipment warranty, separate from the company that installed it, and a licensed Florida contractor can diagnose the fault and file the claim. Check whether your installer is still in business.
Source
Explained in our own words from SolarEdge documentation. AllSolar Energy is not affiliated with SolarEdge. Never open an inverter or touch roof wiring yourself.
Questions
What does SolarEdge Alert: No communication with the Inverter / site (inverter shows Inactive in monitoring) mean?
The inverter has stopped sending data to SolarEdge's servers. This alert fires after about three hours without contact. Power production usually keeps going, but you lose visibility and the system cannot be watched.
Can I fix it myself?
Confirm your home internet works on a phone or laptop and restart the router Check that the solar AC breaker in your electrical panel has not tripped Do not open the inverter, and leave network cables to a licensed solar technician if they are inside the unit Do not open the inverter or touch DC wiring.
My installer closed. Who fixes a SolarEdge Alert: No communication with the Inverter / site (inverter shows Inactive in monitoring)?
Any licensed Florida solar or electrical contractor. SolarEdge equipment warranties usually survive the installer, and the contractor can file the claim.