AllSolar Energy
SolarEdge 2x1F, 2x20, 2x21 and 18x1D to 18x35 families (grid voltage above or be

SolarEdge Grid voltage too high or too low. What it means, the usual causes, and what is safe to check.

SolarEdge Grid voltage too high or too low: What It Means and What to Do

The inverter measured utility voltage outside the allowed range for the country it is set to, so it paused to protect itself and the grid.

What it means

The inverter measured utility voltage outside the allowed range for the country it is set to, so it paused to protect itself and the grid. When the voltage settles back it normally restarts after a short wait. Repeated events can mean a local grid issue or a wiring problem on your side.

Code: 2x1F, 2x20, 2x21 and 18x1D to 18x35 families (grid voltage above or below country limit)

Common causes

  • A temporary utility voltage swing, often during storms or heavy neighborhood air conditioning load
  • Many solar systems on the same neighborhood transformer pushing voltage up at midday
  • Undersized or very long AC wiring between the inverter and the grid connection
  • A loose AC connection or the wrong country setting from commissioning

Safe checks you can do

  1. Check whether the code clears by itself and note the time of day it happens
  2. Confirm the AC breaker for the solar system in your panel has not tripped
  3. Do not touch the inverter wiring or change settings in the app
  4. When to call a technician
    If it happens often or the inverter stays off, call a licensed solar technician, who can check the country setting and AC wiring. If the problem looks like the neighborhood grid, the utility has to be involved too. Call 866-412-4218 or book online.

Installer out of business?

You can still get this fixed. SolarEdge backs its own equipment warranty, separate from the company that installed it, and a licensed Florida contractor can diagnose the fault and file the claim. Check whether your installer is still in business.

Source

  1. SolarEdge Inverters Error Codes and Troubleshooting User Guide, Version 1.3, Residential Inverters Error Codes List

Explained in our own words from SolarEdge documentation. AllSolar Energy is not affiliated with SolarEdge. Never open an inverter or touch roof wiring yourself.

Questions

What does SolarEdge 2x1F, 2x20, 2x21 and 18x1D to 18x35 families (grid voltage above or below country limit) mean?

The inverter measured utility voltage outside the allowed range for the country it is set to, so it paused to protect itself and the grid. When the voltage settles back it normally restarts after a short wait. Repeated events can mean a local grid issue or a wiring problem on your side.

Can I fix it myself?

Check whether the code clears by itself and note the time of day it happens Confirm the AC breaker for the solar system in your panel has not tripped Do not touch the inverter wiring or change settings in the app Do not open the inverter or touch DC wiring.

My installer closed. Who fixes a SolarEdge 2x1F, 2x20, 2x21 and 18x1D to 18x35 families (grid voltage above or below country limit)?

Any licensed Florida solar or electrical contractor. SolarEdge equipment warranties usually survive the installer, and the contractor can file the claim.

1999
Founded in Florida
3
Systems we service: PV, solar pool heat and solar hot water
17
Florida counties served
CVC056660
Solar contractor license, plus EC13005027 electrical
Read our reviews on Google. 4205 St. Johns Parkway, Sanford. 866-412-4218
Call Book a service call