SolarEdge Device locked by a safety feature or by a person. What it means, the usual causes, and what is safe to check.
SolarEdge Device locked by a safety feature or by a person: What It Means and What to Do
Codes in the 3x9 family tell you the inverter is locked and is not running.
What it means
Codes in the 3x9 family tell you the inverter is locked and is not running. SolarEdge says the lock comes either from someone turning something off or from an automatic safety feature. Despite what some websites claim, SolarEdge's own table does not call 3x9A an isolation fault, so the code alone does not tell you why it locked.
Code: 3x9A (and the matching 3x92 to 3x9E family)
Common causes
- A safety feature tripped earlier, such as an arc or ground fault event
- Someone switched the inverter off or changed a setting
- A recent grid outage or storm that triggered a protective shutdown
- A communication or configuration problem that needs an installer to review
Safe checks you can do
- Look at the inverter display or app for any other error that appeared just before this one
- Make sure nobody left the inverter ON/OFF switch in the OFF position
- Do not keep cycling the switch over and over, and never open the inverter
- When to call a technician
Call a licensed solar technician or SolarEdge support, because SolarEdge says to find out why the system locked before reconnecting. A technician should read the event history. Call 866-412-4218 or book online.
Installer out of business?
You can still get this fixed. SolarEdge backs its own equipment warranty, separate from the company that installed it, and a licensed Florida contractor can diagnose the fault and file the claim. Check whether your installer is still in business.
Source
Explained in our own words from SolarEdge documentation. AllSolar Energy is not affiliated with SolarEdge. Never open an inverter or touch roof wiring yourself.
Questions
What does SolarEdge 3x9A (and the matching 3x92 to 3x9E family) mean?
Codes in the 3x9 family tell you the inverter is locked and is not running. SolarEdge says the lock comes either from someone turning something off or from an automatic safety feature. Despite what some websites claim, SolarEdge's own table does not call 3x9A an isolation fault, so the code alone does not tell you why it locked.
Can I fix it myself?
Look at the inverter display or app for any other error that appeared just before this one Make sure nobody left the inverter ON/OFF switch in the OFF position Do not keep cycling the switch over and over, and never open the inverter Do not open the inverter or touch DC wiring.
My installer closed. Who fixes a SolarEdge 3x9A (and the matching 3x92 to 3x9E family)?
Any licensed Florida solar or electrical contractor. SolarEdge equipment warranties usually survive the installer, and the contractor can file the claim.