SolarEdge Grid frequency out of range. What it means, the usual causes, and what is safe to check.
SolarEdge Grid frequency out of range: What It Means and What to Do
The inverter saw the utility frequency drift outside the narrow band it is allowed to run in, so it disconnected.
What it means
The inverter saw the utility frequency drift outside the narrow band it is allowed to run in, so it disconnected. This is normally a brief grid event. If it keeps coming back, the country setting or AC side may need review.
Code: 18x48 to 18x50 (grid frequency above or below thresholds)
Common causes
- A short disturbance on the utility grid
- Switching events or outages in the neighborhood after storms
- A wrong country or grid code selected at setup
- Loose or poor AC connections
Safe checks you can do
- Wait a few minutes to see whether the inverter reconnects on its own
- Check that your main breaker and the solar breaker are on
- Do not open the inverter or adjust settings
- When to call a technician
Call a licensed solar technician if it repeats day after day or the system stays offline. They can reselect the country code and verify AC voltage and frequency. Call 866-412-4218 or book online.
Installer out of business?
You can still get this fixed. SolarEdge backs its own equipment warranty, separate from the company that installed it, and a licensed Florida contractor can diagnose the fault and file the claim. Check whether your installer is still in business.
Source
Explained in our own words from SolarEdge documentation. AllSolar Energy is not affiliated with SolarEdge. Never open an inverter or touch roof wiring yourself.
Questions
What does SolarEdge 18x48 to 18x50 (grid frequency above or below thresholds) mean?
The inverter saw the utility frequency drift outside the narrow band it is allowed to run in, so it disconnected. This is normally a brief grid event. If it keeps coming back, the country setting or AC side may need review.
Can I fix it myself?
Wait a few minutes to see whether the inverter reconnects on its own Check that your main breaker and the solar breaker are on Do not open the inverter or adjust settings Do not open the inverter or touch DC wiring.
My installer closed. Who fixes a SolarEdge 18x48 to 18x50 (grid frequency above or below thresholds)?
Any licensed Florida solar or electrical contractor. SolarEdge equipment warranties usually survive the installer, and the contractor can file the claim.