AllSolar Energy
SolarEdge Error 18xC: Arc Fault Detected

SolarEdge DC arc fault detected. What it means, the usual causes, and what is safe to check.

SolarEdge DC arc fault detected: What It Means and What to Do

The inverter detected what looks like electricity jumping across a gap in the DC wiring, such as a loose or damaged connector, and shut production down.

What it means

The inverter detected what looks like electricity jumping across a gap in the DC wiring, such as a loose or damaged connector, and shut production down. Arcs make heat and are a fire risk, so SolarEdge requires that a qualified person check the system before it is restarted.

Code: Error 18xC: Arc Fault Detected

Common causes

  • A loose or poorly seated DC connector
  • Damaged cable insulation, for example from rodents, sun, or heat over the years
  • Corrosion at connections, which salt air near the coast can speed up
  • A failing module or optimizer connection

Safe checks you can do

  1. Look from the ground for anything unusual such as burnt smell, smoke or discoloration near the inverter and report it
  2. Leave the system off and do not keep restarting it
  3. Never open the inverter or handle roof wiring
  4. When to call a technician
    Call a licensed solar technician the same day. If you see smoke, flames or a burning smell, leave the area and call 911 first. Call 866-412-4218 or book online.

Installer out of business?

You can still get this fixed. SolarEdge backs its own equipment warranty, separate from the company that installed it, and a licensed Florida contractor can diagnose the fault and file the claim. Check whether your installer is still in business.

Source

  1. SolarEdge Application Note: Inverter Arc Detection in SolarEdge Systems (North America), v1.3

Explained in our own words from SolarEdge documentation. AllSolar Energy is not affiliated with SolarEdge. Never open an inverter or touch roof wiring yourself.

Questions

What does SolarEdge Error 18xC: Arc Fault Detected mean?

The inverter detected what looks like electricity jumping across a gap in the DC wiring, such as a loose or damaged connector, and shut production down. Arcs make heat and are a fire risk, so SolarEdge requires that a qualified person check the system before it is restarted.

Can I fix it myself?

Look from the ground for anything unusual such as burnt smell, smoke or discoloration near the inverter and report it Leave the system off and do not keep restarting it Never open the inverter or handle roof wiring Do not open the inverter or touch DC wiring.

My installer closed. Who fixes a SolarEdge Error 18xC: Arc Fault Detected?

Any licensed Florida solar or electrical contractor. SolarEdge equipment warranties usually survive the installer, and the contractor can file the claim.

1999
Founded in Florida
3
Systems we service: PV, solar pool heat and solar hot water
17
Florida counties served
CVC056660
Solar contractor license, plus EC13005027 electrical
Read our reviews on Google. 4205 St. Johns Parkway, Sanford. 866-412-4218
Call Book a service call