common causes, explained below, plus the checks that are safe to do yourself.
Enphase Solid red microinverter light: What It Means and What to Do
A solid red light on a microinverter means the AC grid is normal but it cannot talk to the gateway, or the grid is missing or out of range, or there is an active DC Resistance Low event.
What it means
A solid red light on a microinverter means the AC grid is normal but it cannot talk to the gateway, or the grid is missing or out of range, or there is an active DC Resistance Low event. Enphase notes that short red blinks right after DC power is applied mean a start up failure.
Code: Microinverter status LED solid red / no gateway communication
Common causes
- Gateway offline or power line communication being disrupted
- Grid missing or outside allowed voltage
- An active DC Resistance Low event on that unit
- A tripped breaker or damaged AC cable, including rodent damage
Safe checks you can do
- Check the solar breaker and the gateway power and lights
- Check the app for events on that microinverter
- Do not climb on the roof or unplug the AC or DC connectors
- When to call a technician
Call a licensed solar technician if the red light persists after the breaker and gateway look fine, since only a technician can safely test the AC cable and connectors. Call 866-412-4218 or book online.
Installer out of business?
You can still get this fixed. Enphase backs its own equipment warranty, separate from the company that installed it, and a licensed Florida contractor can diagnose the fault and file the claim. Check whether your installer is still in business.
Source
Explained in our own words from Enphase documentation. AllSolar Energy is not affiliated with Enphase. Never open an inverter or touch roof wiring yourself.
Questions
What does Enphase Microinverter status LED solid red / no gateway communication mean?
A solid red light on a microinverter means the AC grid is normal but it cannot talk to the gateway, or the grid is missing or out of range, or there is an active DC Resistance Low event. Enphase notes that short red blinks right after DC power is applied mean a start up failure.
Can I fix it myself?
Check the solar breaker and the gateway power and lights Check the app for events on that microinverter Do not climb on the roof or unplug the AC or DC connectors Do not open the inverter or touch DC wiring.
My installer closed. Who fixes a Enphase Microinverter status LED solid red / no gateway communication?
Any licensed Florida solar or electrical contractor. Enphase equipment warranties usually survive the installer, and the contractor can file the claim.